Main Line Backups
When the main clogs, waste comes up the lowest fixture, usually a basement floor drain or shower. Standing waste is pumped and extracted before any material removal starts.
- Extraction of standing waste
- Cleanout access checked
Raw sewage backing into your home carries bacteria and viruses that a mop and bleach will not handle. Call Water Heater Repairer and a live dispatcher will route you to an independent, licensed and insured cleanup contractor who works in full protective gear.

Sewage cleanup is classified as Category 3 water under the IICRC S500 standard, the most contaminated class there is. It needs a disciplined sequence and proper protection, otherwise the cleanup spreads the problem rather than ending it.
We route only to licensed, insured independent contractors who wear respirators, disposable suits, nitrile gloves, and boots on every sewage job. Many in the network are IICRC-trained, so ask for credentials when they arrive.
Because waste wicks into porous materials quickly, an active backup goes to the front of the queue. Arrival is often quick, depending on location and how many homes a storm surcharge hit at once.
You get a written, flat-rate scope listing every material to be removed before any tear-out begins. That paper also helps when you file with your insurer.
Expect EPA-registered disinfectants, HEPA vacuums, and air scrubbers built for contaminated jobs. If you want proof the area is clean, ask about ATP or swab testing at the end.
The usual cause is a blocked main line, whether from tree roots, grease buildup, or a broken stretch of clay or cast iron. Others come from the city side, when heavy rain overloads the municipal sewer and it surcharges back into basements. The cleanup steps match, yet the long-term fix depends on which one hit you.
That is why we can route a plumber for a camera inspection of the line alongside the cleanup crew. Knowing what failed keeps you from paying for the same cleanup twice.

Every sewage job follows the same rule: contain, remove, clean, disinfect, then dry.
When the main clogs, waste comes up the lowest fixture, usually a basement floor drain or shower. Standing waste is pumped and extracted before any material removal starts.
An overflow that ran for a while can soak through subfloor and drip into the ceiling below. The contractor checks the underlayment and ceiling cavity with a moisture meter before deciding what to remove.
Carpet and pad that sewage reached cannot be cleaned and go straight into contractor bags. Drywall gets cut well above the high-water line, and wet insulation behind it comes out too.
Concrete, framing, and other hard surfaces get HEPA vacuuming, scrubbing, and an EPA-registered disinfectant left on long enough to work. Negative air machines keep contaminated air from reaching the rest of the home.
A camera inspection through the cleanout shows whether roots, sags, or a broken section caused the backup. Where surcharges are the issue, a backwater valve stops city sewage from flowing back into the house.
After removal and disinfection, the framing and slab need to be fully dry before anything new goes in. Contractors set air movers and dehumidifiers, log moisture readings daily, and use air scrubbers to pull lingering odor.
A short process, run by contractors who see sewage calls constantly.
We tell you to stop all water use, keep kids and pets away from the area, and shut off power if water is near outlets. We also ask which drain overflowed and whether units on a shared line are affected.
We route the call to a nearby licensed cleanup contractor carrying PPE, pumps, and plastic sheeting. If the drain is still clogged, a licensed plumber can be lined up to open it.
The pro traces the contamination, checks moisture in walls and floors, and decides what must be removed. You get a written flat-rate quote and photos before tear-out begins.
After removal, cleaning, disinfection, and drying, the contractor walks you through the space and the drying records. Ask about clearance testing and the contractor's own written workmanship warranty.
Bleach kills surface germs but does nothing for waste soaked inside drywall, carpet pad, or the bottom plate of a wall. A regular shop vac can aerosolize the contamination and spread it through the room. If the odor hangs around, something porous almost always stayed in place.

Stop all water use, keep everyone out of the area, and call.
After a big storm, the basement floor drain started bubbling and then just kept coming. They came in suits and masks, removed the carpet and cut the drywall above the line, with air scrubbers running nonstop. They also suggested a backwater valve, which a plumber put in the next week.
I have a toddler and a dog, so the health side scared me more than the damage. The crew sealed off the hallway with plastic, disinfected everything, and offered swab testing before we moved back into the room. Seeing clean test results is what finally let me relax.
The other half of our duplex shares the lateral, and their clog came up through my shower. The plumber ran a camera and found roots in the old clay pipe right at the property line. Getting both reports in writing made the conversation with my neighbor much easier.
The smell hit me the second I opened the basement door, and I honestly did not know who to call first. The dispatcher told me to stop running water, sent a plumber to clear the main, and had a cleanup contractor there that afternoon. My adjuster took the itemized scope and photos as-is, which saved a lot of back and forth.
If the spill is limited to one room, staying elsewhere in the home is usually fine once containment goes up. Young children, older adults, pregnant women, and anyone with a weak immune system should stay away until cleanup is done.
No. Carpet and pad that touched Category 3 water are considered unsalvageable under industry guidance. Hard items like tile, concrete, and sealed wood can usually be cleaned and disinfected instead.
Usually it is a clog in your main line from roots, grease, or broken pipe. After heavy rain, it can also be the municipal sewer surcharging back up the lateral, which a camera inspection can help sort out.
A backwater valve lets waste leave the house but closes when sewage tries to flow back in from the street. It will not fix a clog on your own line, so a camera inspection still matters.
Many standard policies exclude sewer backup unless you added a specific water backup endorsement. Call your agent, take photos before cleanup, and keep the contractor's written scope and drying logs.
You can request ATP testing or lab swabs to confirm that disinfection worked. You should also get moisture readings showing framing and subfloor are dry before anything is rebuilt.
Calls go to licensed independent contractors covering all of Aurora and the towns around it. Coverage reaches zip codes like 55705.
Older parts of Aurora often still have clay or cast iron laterals, which is where root intrusion and cracked pipe cause repeat backups. Homes on lower ground get hit harder when storm water overloads the city system. Mention the age of the house and any past backups so the right contractor gets the call.

Floor drain backups, basement toilets, and finished lower levels.
Backups on shared lines in apartments, condos, and duplexes.
The same network reaches the suburbs around Aurora.